The famous Aegis F set circuit tracer with cable tracing, pair ID, continuity, polarity, and 240V protection
The TraceAll family of pipe & cable tracers and locators has been designed for tradespeople to be able to locate all services from GPO outlets to buried main lines.
Turn your TraceAll mains tracer into a TraceAll underground pipe & cable locator wit the addition of this wand !
Add inductive signal transmission to your cable locator with this simple TraceAll accessory.
The Aegis CZ5000 Patrol is the simplest-to-use Portable Appliance Tester on the market.
The Aegis CZ5001 PatrolPro is the advanced version of the ever popular Patrol PAT, adding leakage testing to the testing available.
The Aegis Patrol Pro and RCD tester in the one kit to suit all your testing and tagging needs.
Tests RCDs quickly and easily
Turn your single phase PAT into a 3 phase PAT with this simple accessory. Suitable for most PAT testers.
Isolate other equipment on the same circuit when testing portable RCDs. Prevent accidental circuit board tripping and power outages.
Keep test records in one location for compliance and easy reference and compliance
The CZ5075 is a replacement lead set for the CZ5000 Patrol. The lead, probe and clip are all included in this one package.
The CZ20500 Multi-Function electrical tester is the perfect tool for certification of all fixed wiring installations.
A multimeter suited to everyday use by electricians for all standard testing.
Professional clamp meter for commercial/industrial use
Professional clamp meter for domestic/commercial/industrial use
Professional clamp meter for basic domestic/commercial/industrial use
If you’re involved in the commissioning, maintenance and testing of electrical installations, you need the CZ20055.
2-Pole Tester - Voltage/Continuity/Phase
Loop Impedance Tester for fault loop and PSC testing.
Phase Roatation Tester for electrical distribution systems, pumps, motors and other machines
The Aegis adjustable sensitivity AC Voltage Detector is the only tool you need to test AC voltage.
Contractor grade buttset - the original reliable starter for so many people
Loaded with features, the CZ20018 is a great contractor buttset
Step up from the base level and add RainSafeTM, DropSafeTM, and over-voltage/current protection
For PABX technicians, internal systems, and telephone exchanges, you can't go past the CZ20025.
The new standard for voice, data, and video telephone test sets.
The new standard for voice, data, and video telephone test sets - PABX/internal systems enhanced
The new standard for voice, data, and video test telephone test sets - TDR and SmartToneR enhanced
Convert to multi-way lead with a Krone, RJ, and Clips integrated lead set
Convert to multi-way lead with a Krone, RJ, and Clips integrated lead set
Simple Cat 5, Cat 6, and Cat 7 cable tester for everyday use
Simple Cat 5, Cat 6, and Cat 7 cable tester for everyday use with coax and a toner included!
Test network & LAN cables, ports, and IP configuration with the one low cost tool
The CZ1892 TraceAll Complete Tracing system - To locate cables and pipes in any location
The Aegis TraceAll Outdoor Cable & Pipe Locator-to help Contractors locate & trace cables and pipes before they dig
The Aegis CZ1804 TraceAll Coupling Clamp is a rugged signal transmitting coupling clamp. Accessory to Aegis CZ1800 TraceAll Base Unit
The Aegis CZ1801 TraceAll Circuit Tracer - An ergonomic, hand-held receiver. Accessory to The Aegis CZ1800
The LTS No 2 is the classic multimeter specified and used on telecommunication networks for many years.
The one and only Loop-A-line. Your trusted remote for the far end of the line.
The Cable Gauge is a simple to use TDR for cable length measurement and fault location
Safe monitor and break access (2-pole & 4-pole) for Krone
3m/Quante Plug - Monitor/Bridge & Break/Disconnect
Krone Plug - Monitor/Bridge & Break/Disconnect
Madison Plug - Monitor/Bridge & Break/Disconnect
RJ Plug - Monitor/Bridge & Break/Disconnect
Siemens 71 Plug - Monitor/Bridge & Break/Disconnect
Siemens 2000 Plug - Monitor/Bridge & Break/Disconnect
Siemens 5000 Plug - Monitor/Bridge & Break/Disconnect
Marconi Plug - Monitor/Bridge & Break/Disconnect
The QuickSwitch series of products enable a safe, switching connection to many common telecommunications interface blocks.
The CZ23009 is suitable for Marconi modules.
RJ Plug
Siemens 71 Plug
Siemens 2000 Plug
Siemens 5000 Plug
Clips
Krone Plug
Madison Plug
3M/Quante Plug
QuickSwitch
Note! Subject to technical change without notice.
Crocodile/Alligator Plug - Monitor/Bridge & Break/Disconnect